AF-200 Universal® Plate

AF-200 Universal® Plate

Series: GAMBIT AF General

Versatile, oil-resistant gasket sheet, dedicated for a wide range of media applications, providing effective sealing under moderate pressures and temperatures. Ideal for industrial and technical applications requiring high reliability.

The GAMBIT AF General series is a versatile gasket sheet, optimized to work under moderate pressures and temperatures. Due to their versatility, they are an efficient and reliable solution for a wide range of industrial and technical applications.

Technical Specification - GAMBIT AF-200 Universal Gasket Plate®

Material and Composition

The GAMBIT AF-200 Universal® gasket sheet is made of KEVLAR® aramid fibers, mineral fibers, and fillers, bonded with NBR rubber-based adhesive, providing high flexibility and sealing durability.

KEVLAR® is a trademark or registered trademark of E.I. du Pont Nemours and Company or its affiliated companies.

Designation according to DIN 28091-2

FA-AM1-O

Approvals and Certificates

• DVGW
• INIG
• TA Luft (VDI 2200)
• UDT
• DNV GL

Maximum Operating Conditions

• Temporary Temperature: 300°C
• Continuous Operating Temperature: -60°C to +220°C
• Continuous Operating Temperature in Steam: 180°C
• Maximum Pressure: 6 MPa

Dimensions

• Standard Sheet Thicknesses:
  0.3 / 0.5 / 0.8 / 1.0 / 1.5 / 2.0 / 2.5 / 3.0 / 4.0 / 5.0 mm (thicknesses above 5.0 mm done as laminated)

  • Thickness Tolerance: ± 0.1 mm
  • Width/Length Tolerance: ± 10%

• Standard Sheet Sizes:
  1500 × 1500 mm (other sizes available on request within 1500 × 3000 mm range)

  • Dimensional Tolerance: ± 10 mm

Physicochemical Properties

• Density: 2.0 g/cm³ (± 5% according to DIN 28090-2)
• Tensile Strength Across Fibers (min.): 7 MPa (according to DIN 52910)
• Compressibility: 9 - 19% (according to ASTM F36)
• Elastic Recovery (min.): 50% (according to ASTM F36)
• Residual Stresses: (according to DIN 52913)
  • 50 MPa / 16h / 300°C (min.): 22 MPa
  • 50 MPa / 16h / 175°C (min.): 28 MPa

Chemical Resistance - Thickness Increase (according to ASTM F146)

• Oil IRM 903, 150°C / 5h (max): 5%
• Standard Fuel B, 20°C / 5h (max): 5%

Color

Red

Values given in the specification are for gasket sheets with a thickness of 2.0 mm.