AF-Oil® Plate

AF-Oil® Gasket Sheet

Series: GAMBIT AF High

Oil-resistant gasket sheet designed for high-temperature and high-pressure applications. Ideal for use in subsea connections. Suitable for contact with water, steam, fuels, oils, salt solutions, and gases such as natural gas or propane-butane.

The GAMBIT AF High series consists of high-performance gasket sheets, developed using the highest quality raw materials to ensure reliability, durability, and excellent technical parameters in demanding operational conditions.

Technical Specification – GAMBIT AF-OIL® Gasket Sheet

Material and Composition

The GAMBIT AF-OIL® gasket sheet is made of KEVLAR® aramid fibers, mineral fibers, and fillers bonded with NBR rubber-based adhesive.

KEVLAR® is a trademark or registered trademark of E.I. du Pont Nemours and Company or its subsidiaries.

Designation according to DIN 28091-2

FA-AM1-O

Approvals and Certificates

• DVGW
• BAM
• TA Luft (VDI 2200)
• UDT
• DNV GL

Maximum Operating Conditions

• Temporary Temperature: 350°C
• Continuous Operating Temperature: -60°C to +300°C
• Continuous Steam Operating Temperature: 230°C
• Maximum Pressure: 10 MPa

Dimensions

• Standard Sheet Thicknesses:
  0.3 / 0.5 / 0.8 / 1.0 / 1.5 / 2.0 / 2.5 / 3.0 / 4.0 / 5.0 mm (thicknesses above 5.0 mm made as bonded)

  • Thickness Tolerance: ± 0.1 mm
  • Width/Length Tolerance: ± 10%

• Standard Sheet Dimensions:
  1500 × 1500 mm (other sizes available on order within 1500 × 3000 mm)

  • Dimensional Tolerance: ± 10 mm

Physicochemical Properties

• Density: 2.0 g/cm³ (± 5% according to DIN 28090-2)
• Tensile Strength (min.): 9 MPa (according to DIN 52910)
• Compressibility: 5 - 15% (according to ASTM F36)
• Elastic Recovery (min.): 55% (according to ASTM F36)
• Residual Stresses: (according to DIN 52913)
  • 50 MPa / 16h / 300°C (min.): 29 MPa
  • 50 MPa / 16h / 175°C (min.): 35 MPa

Chemical Resistance – Thickness Increase (according to ASTM F146)

• Oil IRM 903, 150°C / 5h (max): 6%
• Standard Fuel B, 20°C / 5h (max): 6%

Color

Green

Values provided in the specification are for gasket sheets with a thickness of 2.0 mm.