Orings EPDM: Sulphur Cured (sulphur-networked)

The vulcanization process is so widespread that even lay people on the word 'vulcanization' will surely answer that they are known. Few people know, however, what this process is about and why it is important. It is primarily important when networking elastomers, from which various rubber products are then produced, widely available in stores. These also include some of the most popular seals, or orings. What are they, how do they arise and what does sulphur or peroxide cover give?

What is the vulcanization process?

Although vulcanization may seem to be a recently known process, this is not true, because the history of this discovery goes back to prehistoric times. The curing of rubber was already known back then, although it did not resemble the vulcanization of modern times. Despite such a discrepancy in time, modern vulcanization was discovered only in the XVIII century, and it was refined only in the 19th century. It is difficult to imagine the current world without the use of rubber, after all, we use it every day - we use tires in cars, we walk in shoes with rubber soles, in gardens we have rubber hoses for watering plants, and in many industries rubber mats and rubber seals are used in the form of, for example, orings. The process of creating rubber was already known to the Aztecs, who obtained latex from the Castilla Elastica tree available in those areas, which they then mixed with juice obtained from local vines. This is how the original rubber was made. Before the vulcanization process was invented and the good of sulphur curednetworking was discovered,it was used to connect two moving parts in oil-saturatedskin machines. Needless to guess, this was a solution that was not very efficient, but also problematic. Vulcanization allowed to combine moving elements with material that, after the processes taking place in the work of the machine, was able to return to its original shape, and therefore was not a one-off. Natural rubber, which has not been cured, is sticky and stretchy, and at lower temperatures crumbles. To prevent this, a vulcanization process is used to eliminate the possibility of polymers moving in the chain, in other words, hardening the rubber, while giving it the properties to return to its original shape after previous deformation under the influence of mechanical or temperature factors. The main material that is used during the networking process is sulphur. However, materials such as peroxide, urethane nets, metal oxides, acetoxysilane are also used.

Chemical side of sulphur vulcanisation

Vulcanization of so-called traditional elastomers, or materials commonly called rubbers, involves the addition (addition) of sulphur to the double chemical bonds between carbon atoms, which are found in molecules of both natural rubbers and synthetic rubbers. In this way, one to three sulphur atoms are substituted in place of the ematried double bond. The sulphur networking reaction usually occurs at 150 C, in special drums called calenders. These drums are applied to a special paste consisting of shredded rhomb sulphur mixed with rubber. This process can be controlled to achieve rubbers of different elasticity, and what is associated with it - hardness and abrasion. The more sulphur added, the stronger the networking. This makes the material less flexible, but the resulting rubber is characterized by significant hardness and abrasion resistance, which is a very desirable feature among rubber rubbers.

Chemical side of the peroxide vulcanisation process

Vulcanization is carried out not only on traditional elastomers, which are rubbers, but also on silicones. However, peroxide is used for this process, not sulphur. This is to change or improve the properties of these elastomers. In the process of vulcanizing material such as silicone, all compounds with two functional groups will actually work, as long as these groups have the ability to join carbon atoms in an elastomer molecule instead of a single, torn bond. Vulcanization can also consist of combining different types of gums formed during it. The most common example of such a process is the repair or regeneration of tyres.

What are orings?

EPDM orings are special rubber products whose task, as a sealant, is to stop a leakage that is not desirable, for example, some liquid or gas (media). At the same time, orings are one of the most popular sealing methods selected. This is because orings (e.g. EPDM rubber) are very easy to install and don't need much space. Undoubtedly, a big plus of the use of orings is the possibility of using them both statically and dynamically. Made of different types of rubber (especially EPDM), it allows use even at 150 °C for a very long time. Orings are closed rings, with a circular cross-section. These sizes are described as the inner diameter and the diameter of the section. Orings are made of different types of elastomers (EPDM, NBR, FPM), the most popular of which are those made of EPDM rubber, as it is resistant to a large number of factors. How are sulfur-networked orings created? Sulphur cured orings are formed by seamless vulcanization, i.e. sulphur teasing. Networked EPDM rubber becomes harder, but this parameter can be modified with the appropriate amount used in the sulphur networking process. 

Buy EPDM orings here

Methods of production of sulphur-coated orings

For the production of orings, two methods are mainly used, each of which depends on several factors, including the size of the oring and the quantity to be produced in a given series.

• quite time-consuming compression method - in this method, the elastomer (for example, EPDM rubber) is manually inserted into the mold and then closes both parts of it. This method does not work for larger production because it takes a very long time. It is most often used in the production of orings with non-standard dimensions (larger than usual available) and a small quantity in a series.
• injection method - automated and definitely more efficient. In this method, the elastomer (for example, EPDM rubber) is pumped into the mold by means of a cochlea. The method is ideal for the production of orings of smaller and most common sizes, which can be produced in series, in large quantities.

EPDM rubber - properties

Of the many elastomers available on the market, EPDM rubber is one of the most popular because it is resistant to many adverse environmental and atmospheric factors. This is why it leads the way in relation to its counterparts, like other general purpose rubbers (SBR, NBR). Ethylene-propylene-die rubber is primarily resistant to adverse weather conditions, including UV and ozone radiation, water and steam, moisture and chemicals.

Sulphur cured and peroxide cured orings - characteristics and application

To move on to the use of orings made of sulphur cured or peroxide cured rubber EPDM, you need to familiarize yourself with the effect of the vulcanization process on the properties that the rubber, and therefore the oring made of it, will possess. Depending on the substrate that will be used during the vulcanization process, the final product, epdm rubber, will have different properties in terms of temperature operation.

• sulphur-sulphur networking - EPDM rubber will have a continuous operating temperature range from - 45 degrees Celsius, to + 120 C.
• peroxide coding - EPDM rubber will have a continuous operating temperature range from - 45 degrees Celsius to + 150 C.

Advantages of EPDM orings

Made of sulphur cured or peroxide cured rubber, EPDM orings have a number of properties desired by their users. These include, but are not only:

• wide temperature range of continuous operation (120 C - 150 C)
• excellent resistance to ozone, UV radiation and other adverse weather conditions
• good rate of permanent deformation after compression
• resistance to moisture, steam and water
• resistance to ketones, lyes, polar solvents, alcohols
• resistance to glycol-based brake fluids (DOT 3 and 4) and silicone-based (DOT 5)
• resistance to flammable hydraulic fluids (HFD - R)
• resistance to glycol, acetone, many organic and inorganic acids (with low concentrations), alkali (and therefore most cleaning agents, which greatly facilitates the maintenance of such oring clean)

What are EPDM orings not immune to? Despite their high resistance to many factors, EPDM orings are not resistant to certain substances. These include, but are not limited to:

• petroleum products such as lubricants, oils or fuels - nbr rubber works here
• organic solvents
• non-polar solvents
• aliphatic and aromatic hydrocarbons - fpm/viton will work better here
• concentrated acids

Nevertheless, the number of positive features of EPDM rubber definitely distinguishes it from other rubbers available on the market.

Application and installation of EPDM orings

Orings are most commonly used in cars due to their high resistance to glycol-based brake fluids (DOT 3 and 4) and silicone-based (DOT 5) and for flammable hydraulic liquids (HFD - R). In addition, the car will be used in: engine, injectors, turbo cable, thermostat, steering wheel, mirror, ignition camera, speaker housing. However, these are not all places where you can meet orings in the car. In addition to cars, with EPDM orings we can meet in computer keyboards under the keys, as gaskets in taps, or in various industrial machines and devices.

Installation of EPDM orings

Orings themselves are very easy to assemble, hence their popularity as sealants. However, there are a few things to keep in mind when installing EPDM orings so as not to damage them and at the same time enjoy a long time of use. Here are some useful tips for installing EPDM orings:

• orings should not be used to seal sharp edges (risk of damage) or be used to install sharp and hard tools. Since oring is a fairly sensitive element to sharp edges, it is recommended to blunt or round them before installation.
• you need to make sure that you have purchased a previous type of oring so that you do not use the wrong type of
• do not leave any impurities or other residues, both in the groove and on the oring
• orings cannot be glued as there is a risk of hardening of the
• all rubbers except EPDM should be used for mounting oils and lubricants adapted to the resistance of the material; it is unacceptable to use weights or other mineral oils when installing EPDM rubber orings
• you cannot push the oring through the holes
• whereas the resistance of the material from which oring was made to cleaning agents should be checked; in the case of EPDM rubber, such oring will be resistant to most cleaning products due to their composition (mainly the rules to which this type of rubber is resistant)
• during installation, the oring may be stretched by 20 % of the internal diameter, provided that the extension is short-lived

According to ISO 2230, seals such as oring can be stored for 5 to 10 years, depending on the plastic they are made of. As EPDM rubber is resistant to many different factors with which other elastomers cope much worse, oring made of EPDM rubber can be successfully stored for up to 10 years. It is important not to expose such products to extreme temperatures and humidity exceeding 70 %, as well as to oxygen or ozone. The best solution will therefore be to store such products in packaging or sealed containers.