Aflas® TFE P o-rings

Oring Aflas TFE/P

Aflas® TFE P o-rings

Oringi Aflas

Oring Aflas TFE/P

Due to their properties,  Aflas are best suited for the automotive industry and for the production of cables as curtain insulation. Other industries are also happy to use this type of oring,  using them in difficult conditions where rubber components are needed.
The material used in the production of Aflas orings  is a copolymer  of tetrafluoroethylene  and propylene with a fluoride content of about 54%. In practice, such a mixture is resistant to: acids, oil, industrial solvents, steam, oils and lubricants, phosphate esters, amamine, petroleum fluids, brake fluids and corrosion inhibitors. Insensitivity to a wide range of chemical substances goes hand in hand with insensitivity to high and low temperatures (maximum range: from -14°C to +175°C). Compared to other  fluoroelastomers, the material from which  aflas orings aremade is distinguished by better properties at low temperatures. An obstacle to the use of orings  of this type can be their poor compression at elevated temperatures.

No products were found matching your selection.

Aflas TFE / P high temperature O-rings

Aflas O-rings temperature range

Aflas orings  made of TFE/P are also ideal for use in high temperature areas.Oringi Aflas  temperature range:-5°C to +203°C

Aflas - Chemical resistance

Due to tfe/p production, these orings have a replacement chemical resistance:

  • mineral oils
  • synthetic oils
  • vegetable oils
  • gearbox oils
  • gear oils
  • gear system oils
  • Borygo type coolants
  • brake fluids DOT 3 DOT 4 DOT 5
  • smar silikonowy