O-rings

O-rings

Oringi NBR FPM MVQ VMQ Sklep internetowy POWER Rubber

oringi gumowe zielone rozne rozmiary

In our offer high quality rubber orings. We offer production of orings and more than 1 million orings available at your fingertips.
Please contact us: +48 505 16 03 03 Select Oring type from the available categories, and in it a cateogor with the correct size. First dimension is the diameter of the above. the second dimension is thickness.
Orings catalogue is available here.

Showing 6493–6504 of 6517 results

Rubber orings and OP sealing rings

O-ring-shaped seals

Uszczelki w ksztalcie o-ring

The name oring O-ring) means a mechanical seal made in the shape of a three-dimensional ring with a circular cross-section. It can resemble a tyre tube, ring or weight. The oring-shaped seal was designed around 1896. since then, it has been one of the most popular seals with use in both dynamic and static machine designs. It has gained its popularity thanks to its universal use, ease of production and assembly and thanks to low production costs is available on the market at affordable prices. Oring was created to place it between two or more parts in a special cut (groove) of one part and squeeze it with the other part. In this way, it creates a seal at the joining boundary. An additional advantage is the material from which such seals are made. Oringi are made of various types of rubber, with different strength parameters, however, the flexible nature of the rubber allows the elimination of minor imperfections of components for sealing eg. chipping. The circular-section sealing ring is compressed, creates a tight connection and prevents fluids, gases, dust from getting out or out of the machine. Due to the way orings are assembled, which requires an ideal fit, it should be remembered that Oringi are available in different sizes. On our side, the first dimension is the inner diameter of oring, and the second dimension is thickness. Our company also offers the production of orings under size.

Rubber o-rings

Oringi gumowe

Rubber orings are mainly made from a combination of different types of rubber based on elastomers. Each type of rubber used in the mixture has a different specification, depending on the selection of oringi components made of them will have different characteristics. The use of oring depends on the appropriate selection of materials. To select the appropriate oring, consider in which environment it will be used. Whether the automotive, mechanical industry, where the seal is in constant contact with various types of oils, lubricants, gasoline or oil, will be the place of its use and should be resistant to aging, deformation or weather conditions. Or maybe we are interested in the food or chemical industry, and it is important for us that seals do not carry odor and taste, so that they have FDA-type certificates and various approvals for contact with food and human skin (e.g. medical gloves). Rubber orings have a wide application from obvious everyday sites like taps in our homes, through gym machines or cars, to specialized places like mining, aerospace or even space. It all depends on the expectations to be met by the seal and on the appropriate selection of ingredients during production. As a manufacturer of orings, seals and rubber products, we guarantee our customers that the products acquired with us meet the standards, have certificates, but more importantly they will satisfy even the most demanding customer.

O-rings shop

oring gumowy sklep powerrubbercom nbr fkm vmq silikon
Oringi gumowe

Rubber orings with orings we can properly seal various types of machines. Their flexible structure allows for the proper functioning of many devices. They are an invaluable help during intensive use. Flexibility is a desirable feature, both in solid stews and moving machines. Rubber Oringi have many types. This allows you to choose a product that suits your needs. At Power Rubber we have FPM, FKM, EPDM, oil-resistant and silicone orings. Each of them is characterized by careful workmanship, which will translate into the quality of their work. Power Rubber has created a place for you to find rubber products that are unmatched. That’s why our orings are so well reviewed by our customers.Welcome to visit our Orings

Power Rubber is a distributor of orings and rubber products on the Polish market. In our offer you will find only high-class products that meet all standards. We offer high-quality rubber orings and rubber products made of the highest quality rubber appropriately selected parameters depending on the environment of its purpose.

Our products are characterized by high quality, abrasion strength, physical and mechanical wear, resistance to deformation and high flexibility.

We encourage you to familiarize yourself with the catalogue of rubber orings, in which we present the range of our range and a description of the individual products. In the subcategories “Rubber Oringi” there are detailed descriptions of orings: Aflas®,FEP,,  EPDM,,  HNBR,,  HNBR,  Kalrez®,Neoprene, PTFE, Silicone, Viton® and oring adhesives and instrumentation.

Oringi come in different sizes, so please read the dimensions available on our website. Select the Type of Orings from the available categories, and in the category with the correct size. The first dimension given is the inner diameter of the oring, and the second dimension is thickness.

In order to meet the requirements especially for our customers, our offer provides the production of personalized orings taking into account dimension, color or unusual purpose, as well as we have more than 1 million orings available immediately.

We invite you to use the offer, and if you have any questions, please contact us by phone at: +48 505 160 303 or by e-mail: power@powerrubber.com.

 

 

Store near Warsaw – Pruszków

Orings Online Store

Power Rubber is a distributor of orings and rubber products on the Polish market. In our offer you will find only high-class products that meet all standards. We offer high-quality rubber orings and rubber products made of the highest quality rubber appropriately selected parameters depending on the environment of its purpose.

Our products are characterized by high quality, abrasion strength, physical and mechanical wear, resistance to deformation and high flexibility.

We encourage you to familiarize yourself with the catalogue of rubber orings, in which we present the range of our range and a description of the individual products. In the subcategories “Rubber Oringi” there are detailed descriptions of orings: Aflas®,FEP,,  EPDM,,  HNBR,,  HNBR,  Kalrez®,Neoprene, PTFE, Silicone, Viton® and oring adhesives and instrumentation.

Oringi come in different sizes, so please read the dimensions available on our website. Select the Type of Orings from the available categories, and in the category with the correct size. The first dimension given is the inner diameter of the oring, and the second dimension is thickness.

In order to meet the requirements especially for our customers, our offer provides the production of personalized orings taking into account dimension, color or unusual purpose, as well as we have more than 1 million orings available immediately.

We invite you to use the offer, and if you have any questions, please contact us by phone at: +48 505 160 303 or by e-mail: power@powerrubber.com

Orings in Warsaw

Power Rubber is a rubber store. It offers m.in. oringi and rubber products, and is located a dozen minutes from the center of Warsaw. We are 20 kilometres from the center of Warsaw. Which gives you amazing opportunities to quickly reach your business even during rush hour.

The company’s ideal location is right at the exit of the A2 motorway. To get to the company’s headquarters from the CENTER of Warsaw, we need about 20-30 minutes.

The city of Pruszków, where the company is located, can be reached in many ways. The first is to go to Al. Jerusalem, later to enter the S2 and A2 and go down to the Pruszków exit. After turning right from the highway towards ul. On May 3, you will already see the company’s headquarters on the left. Another possible way to get to us from the center of Warsaw is to drive The Vistula river and choose the direction in turn on the S8 and A2. Again, as above, we choose the exit on Pruszków and after turning right from the highway in the direction of ul. 3 May you will already see the headquarters of the company.

 

 

Oring Manufacture

Power Rubber is a leading manufacturer of technical seals on the Polish market including rubber orings, silicone seals and other types of rubber products.
Technical seals are an essential structural element of any type of machine. A well-chosen gasket not only improves machine productivity, it also provides less mechanical wear of the equipment.
Highly specialized machine park located in close proximity to Warsaw. Modern technologies and close cooperation with leading manufacturers of rubber raw materials. Attention to product quality, every detail of the finish and use of only certified products. These are just some of the features thanks to which the rubber products we produce are characterized by excellent technical parameters.

By investing in the latest technologies and constantly improving the qualifications of our specialists, we not only improve the products placed in our catalog, but also introduce more and more newer positions. We treat each customer individually, and personalized orders are not a problem for us. If you are looking for specialty seals such as oil-resistant or high temperature scans, please visit our shop. In the case of the production of orders from any rubber mixture of the type: NBR, FKM, FPM, Viton®, EPDM or silicones, seals with unusual parameters of the type of flat seals, rings in a rectangular or square section, please contact our team. We guarantee professional help.

 

 

Orings Wholesale

Wholesale with the highest access from the hand of flat rubber orings, and in the shape of a torus such as: Oringi NBR, Oringi EPDM, O-rings Viton®, Silicone O-rings, Oringi CR is located 15 minutes from Warsaw – in Pruszków. Power Rubber’s headquarters have warehouses where approximately one million rubber seals of various types are stored.

Wholesale, production, shop and office are located at the exit of the A2 motorway in Pruszków. This solution enables fast online orders to be executed both wholesale and retail. It also allows our customers to easily reach our warehouses and professional assistance available on site. Our specialists will help you choose the right type of oringa made of the right rubber mixture, determine the dimensions of the seal by measuring the used oring or groove intended for sealing.

We invite you to contact us to place an order or get expert advice:
by phone: +48 505 16 03 03
by e-mail: power@powerrubber.comthrough
our contact form..

Dimensions of orings

The correct dimensioning of the oring in the metric system is to measure the inner dimension of the ring (diameter) and its thickness (section). The diameter of oring changes normally every 1 mm, and its section every 0.5 mm. According to this scheme, all the dimensions of orings are given on our website. For example, when you enter the rubber oringi tab, you see the inscription “Oring 10×1.78 NBR”. This means that the inner diameter of the presented oring is 10mm and the thickness of 1.78 NBR (made of NBR rubber).

Oringi are so versatile and widely used that as a manufacturer we cannot afford to limit sizes. Oringi produced by us can be found in different sizes. It all depends on the needs specified by the customer. In our store you will find the dimensions of gaskets, which are most often used. However, we would like to remind you that Power Rubber does not limit its range to the catalogue. We also accept personalized orders. Especially for our customers, we will fulfill every order from mini oringów to large e.g. diameter of which is 14 meters.

Having oring for exchange, we can suggest its dimensions and order the same. If the gasket is deformed, it is recommended to measure its dimensions several times in different places and to pull out the average and to order a set of seals consisting of a desired, smaller and larger size size for the perfect fit. Where it is not possible to measure the replaced gasket, it is advisable to make the dimensions of the groove (socket), the gap in which the seal is to be found or to be taken to the company’s warehouse near Warsaw and select the ideal model.

Metric orings

Dimensions of orings or other types of seals can be given in two different units of measure. Customizable thickness and width markings are given in meters or inches.

The phrase “metric orings” means that the values describing the seal data are given in the metric system.  A metric system is a unit of measurement system belonging to the International Unit of Measure (SI) unit based on a unit of length “meter”. Unit 1 m (in words: one meter) corresponds in turn: 100cm (in words: one hundred centimeters) and 1000mm (in words: one thousand millimeters).

In the Power Rubber store, oring kits and seals are provided in this system. The products described in our catalogues contain descriptions in millimeters. To know how to choose oring you should be aware that the inner diameter of the oring changes every 1mm and its thickness in the cross-section every 0.5mm.

Metric dimensions to inch can be easily converted knowing that 25.4 mm corresponds to 1 international inch. If we know that the seal we need has a dimension e.g. 1.25 inch is multiply it by 25.4mm and we get the result of the gasket in millimeters. In this case, the display is 31.75mm.
1.25 inch x 25.4mm = 31.75mm

 

 

Inch Orings

Inch orings are mainly produced for The United Kingdom, British colonies or for the United States market. Wherever an inch is used. An inch from English is called inch, in abbreviated entry: in, or a character.”
1 inch = 1 in = 1”

The British system of measures, called imperial units, can also be found in Poland. It is used, among other things, in hydraulics when determining the diameter of pipes, connectors or as a diagonal measure of the computer’s monitor or TV screen.

As a leading manufacturer on the Polish market, Power Rubber offers gaskets, oringi and rubber products served in metric dimensions.

Below we suggest how to convert inch oringi on metric orings.
One inch (international) corresponds to 25.4 millimeters. With this knowledge, we can convert inches into millimeters. Knowing, for example, the oring’s inner diameter in inches we multiply it by a constant value of 25.4 and get the inner diameter of oring in millimeters e.g.:
1.25 in x 25.4mm = 31.75mm
Similarly, we can convert metric oringi, into inch. However, this time we need to divide:
31.75mm / 25.4mm = 1.25 in

Grottoes and tooling

The instrumentation for rubber or oring is composed of tools made of the highest quality hardened steel. In this offer, it is worth checking the sets of caves, both small and large. Oring skewers allow you to efficiently disassemble these seals, which allows you to increase their service life. This allows you to remove and insert these types of technical seals many times. As a manufacturer, we guarantee that the tools recommended by us are characterized by strength, hardness, plasticity and elasticity, as well as resistant to abrasion. So you will serve long years! Each of the offered sets was made with the utmost attention to detail. The quality of instrumentation translates into the comfort and ergonomics of our customers’ work.

 

 

Glues for orings

Taking care of the quality of your services, you are looking for the best solutions, products of the best quality. Therefore, in our offer we have professional adhesives for oringów.

Specialized oring adhesives are solvent-free, so they do not react with the glued material. Oring gluing adhesive is designed to bond rubber, rubber, rubber elements in a durable and non-invasive manner, as well as: glass, wood, paper, leather, plastics or small metal or steel elements to form a flexible connector.

The sweats made with oring adhesive are resistant to oils and fuels, are flexible and durable at the same time. They are characterized by high temperature strength, pressure, chemical resistance and mechanical abrasion. It has high strength for fatigue material.

In the offer of our store there are two types of glue:
– Cyanoacrylic adhesive
– Anaebobic adhesive

 

 

O-ring

We have a wide range of sealing rings. More than 1,500,000 orings are available in our range, all available with delivery for the next business day or even the same business day. Consent rings with DIN 3760. Especially close access is possible for nearby locals located around Warsaw.

Circular and resting sealing rings for movement and resting

Wheeled sealing rings for motion and rest ing rings in accordance with PN-60/M-86961, PN-64/M-73093 and PN-90/M-73092. These are the most commonly required Polish Standards for technical seals for both rotational and static connections – occurring under the name of resting connections.

NBR Orings

In our company you will find highly specialized products, as well as the most popular ones. One of the more popular sealants is the NBR O-ring.   The characteristics of the material from which this product is made are good mechanical properties, resistance to deformation and abrasion.  NBR rubber tolerates elevated temperatures and contact with petroleum and petroleum products well. Thanks to general access to  acrylonitril-butadiene  rubber, the so-called  NBR rubber and the affordable production price ofringiNBR have found widespread use in various industries.

Viton® Orings

Seals made of a specially developed rubber housing are named Viton® Orings. According to the latest technology, properly selected ingredients have made Oringi Viton® the most specialized seals. Viton® seals also known as FKM, FPM or Fluoride or are oil-resistant. They also show high resistance to lubricants, fats, hydraulic fluids, as well as high temperatures up to 204°C. Their additional characteristic feature is the low permeability of gases. They also have properties such as low deformation capacity, weather resistance and aging, and are non-flammable. They are ideal for use in vacuum, chemical, automotive, aerospace and even space environments.

EPDM Orings

The Power Rubber manufacturer offers a wide range of EPDM Orings. These are seals that, in a cross-section, resemble the letter “o” in their shape. They are made of EPDM rubber, which is distinguished by high flexibility, resistance to deformation and abrasion. Oringi made of this material are widely used e.g. in the automotive industry in braking systems due to the possibility of contact with brake fluids based on glycol or silicone. In addition, they show high resistance to hot waater, steam of water, ozone and mild acids.

 

 

Silicon Orings

Silicone orings are also called multi-purpose orings. The silicone from which the gaskets are made, does not absorb water, is an excellent electrical insulator which owes to vmq material, and in addition, they are resistant to high temperatures. Silicone orings called high temperatures are resistant to negative temperatures up to -50°C, as well as positive up to +300°C. They found their use in the medical, electrical, hydraulic, metallurgical and even food industries. They are resistant to biological microbes, fungi, do not absorb odors and flavors m.in therefore they are FDA certified.